SPECS:
CROSS SERRATED, REAR DRIVESHAFT FLANGE YOKE
6.10" = APPROX MAX OUTSIDE "SWING" DIAMETER (155MM?)
5.31" = APPROX BOLT HOLE CENTERLINE LENGTH (measured diagonally)
3 3/4" x 3 3/4" = APPROX BOLT HOLE CENTERLINE SPACINGS (measured in a square pattern)
3.750" = MALE PILOT DIAMETER
2.772" = APPROX LENGTH, CENTER OF UNIVERSAL JOINT TO FLAT OF SERRATED FACE
.409" = APPROX BOLT HOLE DRILLED NON-THREADED DIAMETER
NEW - DISTRIBUTED BY AAM
*REQUIRES A 1555 SERIES UNIVERSAL JOINT (1.374"~34.9mm Cap X 4.965"~126.1mm Span)
Description
40038046. THIS REAR DRIVESHAFT FLANGE YOKE FITS VARIOUS 2006~2013+ era DODGE RAM 4500/5500 APPLICATIONS (-not all apply). MOUNTS TO THE REAR TRANSFER CASE MATING FLANGE AND IS ALSO SEEN USED AT BOTH THE DIFF AND TRANSFER CASE ENDS ON SOME DANA SPICER DESIGNED DODGE 4500/5500 REAR DRIVESHAFT ASSEMBLIES. REQUIRES THE LARGER 1555 SERIES UNIVERSAL JOINT (1.374″cap X 4.965″span).
TECH TIP: ALSO MATES TO THE DANA S111 REAR DIFF. ON CERTAIN MODEL CONFIGURATIONS.
TECH TIP: CURRENT AAM REAR DIFFS DO NOT USE THE CROSS SERRATED STYLE FLANGE YOKE.
PLEASE CONFIRM PART NUMBER(s) AND SPECS BEFORE ORDERING. IF YOU HAVE ANY QUESTIONS ABOUT FIT/APPLICATION – CALL US!
COVERS / REPLACES PART NUMBER(s)
40038046 (AAM#)
40038045 (AAM CASTING#)
5502-531 (PTI#)
68004855AA (OEM#)
5007261 (SPICER ALT#, ..pending)
(seen used on assembly#’s: 40038223, 52853227ac)
Reviews
There are no reviews yet.