SPECS:
37 SPLINE
1.609" = APPROX SPLINE INSIDE MAJOR DIAMETER
.240" = COUNTERBORED SPLINE DEPTH (SPLINES REMOVED)
2" = LENGTH THRU SPLINED HOLE
2.5" = GROUND HUB / SEALING DIAMETER
4.3" = APPROX LENGTH, CENTER OF UNIVERSAL JOINT TO END OF SPLINE
2.5" ~ 2.7" = APPROX MIN/MAX DIAMETER WHERE NUT & WASHER SIT (max diameter that the socket can be)
NEW - DISTRIBUTED BY DANA SPICER
*REQUIRES A 1410 SERIES UNIVERSAL JOINT (4.188"span X 1.188"cap)
*METAL SEAL/SLINGER IS NOT INCLUDED - see other related yokes below for options
Description
3-4-14371-1 FITS VARIOUS FORD & DODGE REAR DANA MODEL 80 DIFFERENTIALS (-not all apply).
TECH TIP: ALTERNATE VERSION SEEN USED – HAS A ROUNDED METAL SLINGER – AND THE NUT/SOCKET AREA IS SMALLER.! – SEE SKU# 3-4-11081-1X
TECH TIP: ALTERNATE VERSION SEEN USED – HAS A FLAT METAL SLINGER – AND THE NUT/SOCKET AREA IS LARGER THAN THE 3-4-11081-1X – SEE SKU# 3-4-14391-1X
PLEASE CONFIRM PART NUMBER(s) AND SPECS BEFORE ORDERING. IF YOU HAVE ANY QUESTIONS ABOUT FIT/APPLICATION – CALL US!
COVERS / REPLACES PART NUMBER(s)
3-4-14371-1 (SPICER#)
C3-4-2019 (CASTING# – caution!! – CASTING NUMBERS CAN BE SEEN USED ON OTHER INCOMPATIBLE ITEMS – ALWAYS CHECK YOUR SPECS.!)
