SPECS:
3.937" or 100.00MM = APPROX BOLT HOLE TO BOLT HOLE CENTERLINE "CIRCLE DIAMETER" ( measured diagonally-ref A )
2.782" or 70.66MM = APPROX BOLT HOLE TO BOLE HOLE CENTERLINE DISTANCE ( squared pattern-ref B )
2.375" or 60.33MM = APPROX DISTANCE, FLAT OF FLANGE SERRATIONS TO CENTER OF UJ CAP
4.720" or 119.88MM = APPROX OUTSIDE MAJOR SWING DIAMETER
.435" or 11.05MM = APPROX BOLT HOLE DIAMETERS
NEW - DISTRIBUTED BY PTI
*REQUIRES A 1350 SERIES UNIVERSAL JOINT (3 5/8"span X 1 3/16"cap)
*FITS DANA/COMER DRIVESHAFTS - NOT USED ON AAM DRIVESHAFTS (see sku# 40038539)
Description
3502-391 IS A 4-bolt, CROSS SERRATED STYLE DRIVESHAFT FLANGE YOKE. SEEN USED ON VARIOUS 2008+ DODGE RAM 4500/5500 MODELS WHEN THE DRIVESHAFT WAS MADE BY DANA/COMER/SPICER (-not all apply).
TECH TIP: 2003+ 2500/3500 MODELS CAN USE EITHER A 1344 OR A 1350 SERIES UNIVERSAL JOINT AND IT HAS A DIFFERENT PATTERN THAN THE FLANGE YOUR LOOKING AT.
TECH TIP: THIS IS NOT SEEN USED ON AAM DRIVESHAFTS (only Dana/Comer manufactured driveshafts)
PLEASE CONFIRM PART NUMBER(s) AND SPECS BEFORE ORDERING. IF YOU HAVE ANY QUESTIONS ABOUT FIT/APPLICATION – CALL US!
COVERS / REPLACES PART NUMBER(s)
3502-391 (PTI#)
68036718AB (…pending 11/20)
350.9.0, 1TAT, CMMR (casting numbers for reference only)
